Stevens Insulation Adhesive |
Stevens Insulation Adhesive Stevens Insulation Adhesive is a VOC-free, one-part, rising, moisture-cure foam adhesive designed for bonding most insulation and recovery boards to most flat roofing decks. It is also ideal for bonding insulation and recovery boards directly to mineral surfaced modified bitumen. In fact, Stevens Insulation Adhesive is also ideal for adhering insulation to steel, concrete, plywood, OSB, fiberboard, Tectum and gypsum. Stevens Insulation Adhesive is available in 1- and 2.5 gallon (3.7- and 9.4 liter) F-style cans and can be cart or hand applied. The insulation board is placed into 3/8- to 1/2-inch (9.5 - 12.7 mm) liquid beads of the adhesive that will foam in place within 7 to 30 minutes after application, depending on the temperature and humidity levels. The insulation can generally be roofed over within 15 to 30 minutes, and the adhesive reaches a full strength cure within 24 hours. Once cured, the bond is highly resistant to heat, water and most chemicals. Easy to Use and Saves Labor Stevens Insulation Adhesive does not require expensive mixing or spray-rigs, electric power or air-pressure, and allows for fast installation of up to 75,000 square feet (7,000 m2) per day. Plus with Stevens Insulation Adhesive only one walk-in is typically required, and since mechanical fastening is not required, you can save considerable time and labor. Empty adhesive containers can be disposed as regular refuse. Coverage Rates While coverage rates will vary depending on the type of deck surface and the insulation type, a coverage rate of 350 square feet (32.5 m2) per gallon is typical when using 3/8- to 1/2-inch beads, 12-inches (304 mm) on center. Approved Substrates Stevens Insulation Adhesive is approved for use with the following substrates (contact the Dow Roofing Systems Technical Dept. for Factory Mutual approval information):
In addition, Stevens Insulation Adhesive can be used with the following insulation and/or recovery boards:
Packaging & Warranty One gallon cans of Stevens Insulation Adhesive are shipped four
cans/carton, 36 cartons/pallet. Two and one-half (2.5) gallon cans are
shipped two cans/carton, 36 cartons/pallet. Recommended storage
temperature is 50o to 80oF (10o to 26oC)
in a dry area out of direct sunlight. Opened containers must be used right
away. Product shelf life is six (6) months when properly stored. Stevens
Insulation Adhesive comes with a standard 10-year warranty, which is
included under the terms of the Dow Roofing Systems Warranty when used per Dow Roofing Systems
specifications and installation recommendations in an approved and
warranted Dow Roofing Systems installation. Longer term warranties are also available.
Contact the Dow Roofing Systems Warranty Department for information and details. |
Close window
Print
