STYROFOAM™ Brand Extruded Polystyrene (XPS) Foam Insulation offers the best moisture resistance performance of any insulation on the market today.
The excellent long-term thermal performance, moisture resistance, compressive strength and ease of use of STYROFOAM™ Brand XPS Foam Insulation are highly valued in conventional low- and steep-slope roofing applications. In addition, plaza and protected membrane roofs insulated with STYROFOAM™ Brand XPS Foam Insulation have proven to last 40 years or more.
| STYROFOAM™ Brand XPS Foam Insulation Products for Conventional and Protected Membrane Applications | ||
| Product | Description | Application |
| STYROFOAM™ Brand DECKMATE™ Insulation (Canada Only) | Extruded polystyrene foam insulation board with shiplap edges; minimum compressive strength of 16 psi (110 kPa) | Conventional low-slope applications (insulation can be installed directly on structural steel deck in most building code jurisdictions; consult your sales representative) |
| STYROFOAM™ Brand DECKMATE™ Plus Insulation | Extruded polystyrene foam insulation board with shiplap edges; minimum compressive strength of 20 psi (140 kPa) | Conventional low-slope applications (insulation can be installed directly on structural steel deck in most building code jurisdictions; consult your sales representative) |
| STYROFOAM™ Brand DECKMATE™ Plus FA Insulation (U.S. Only) | Extruded polystyrene foam insulation board with a planed surface and shiplap edges; minimum compressive strength of 20 psi (140 kPa) | Fully adhered conventional low-slope roofs (insulation can be installed directly on structural steel deck beneath a non-bituminous sheet membrane; consult your sales representative) |
| STYROFOAM™ Brand Tapered DECKMATE™ Plus FA Insulation (U.S. Only) | Extruded polystyrene foam insulation board with precision-tapered edges and a planed surface; minimum compressive strength of 25 psi (170 kPa) | Conventional flat roofs (insulation can be installed directly on structural steel deck in all building code jurisdictions; consult your sales representative) |
| STYROFOAM™ Brand HIGHLOAD 40, 60 or 100 Insulation | Extruded polystyrene foam insulation board with high compressive strengths from 40 psi to 100 psi (275 kPa to 690 kPa) | Plaza and protected membrane roofs that must withstand heavy traffic |
| STYROFOAM™ Brand PLAZAMATE™ Insulation (U.S. Only) | High-density extruded polystyrene foam insulation board with 1/4" x 1/2" drainage channels on the bottom long edge of each board | Installation above waterproofing or roofing membranes in most plaza deck applications |
| STYROFOAM™ Brand RECOVERMATE CR Insulation | Fanfolded extruded polystyrene foam board with poly-coated kraft facers as a protective layer between the existing roof and new recovery membrane; facers provide puncture and chemical resistance | Installation over entire surface of old roof, on top of existing membrane; top with new ballasted or light-colored mechanically attached sheet membrane |
| STYROFOAM™ Brand ROOFMATE™ Insulation | Extruded polystyrene foam insulation with drainage channels on the bottom long edge in the U.S. (In Canada, shiplap or butt edge treatment) | Installation above waterproofing or roofing membranes in PMR applications |
We're here to help. If you're not finding the information you need, please let us know.